Disruption of cholesterol homeostasis triggers periodontal inflammation and alveolar bone loss.

Oral diseases exhibit a significant association with metabolic syndrome, including dyslipidemia. However, direct evidence supporting this relationship is lacking, and the involvement of cholesterol metabolism in the pathogenesis of periodontitis (PD) has yet to be determined. In this study, we showed that high cholesterol caused periodontal inflammation in mice. Cholesterol homeostasis in human gingival fibroblasts was disrupted by enhanced uptake through C-X-C motif chemokine ligand 16 (CXCL16), upregulation of cholesterol hydroxylase (CH25H), and the production of 25-hydroxycholesterol (an oxysterol metabolite of CH25H). Retinoid-related orphan receptor α (RORα) mediated the transcriptional upregulation of inflammatory mediators; consequently, PD pathogenesis mechanisms, including alveolar bone loss, were stimulated. Our collective data provided direct evidence that hyperlipidemia is a risk factor for PD and supported that inhibition of the CXCL16-CH25H-RORα axis is a potential treatment mechanism for PD as a systemic disorder manifestation.

Condylar volume and positional changes following a bilateral sagittal split ramus osteotomy in skeletal class II and III malocclusions.

BACKGROUND: Mandibular condyle remodeling and displacement are post-orthognathic surgery concerns that can potentially lead to occlusal issues after bilateral sagittal split ramus osteotomy. This retrospective study examined the relationship between condylar volume changes and position alterations after surgery in patients with skeletal class II and III malocclusions using cone-beam CT. METHODS: The study included 16 patients (6 with Class II malocclusion, 10 with Class III malocclusion) who underwent bilateral sagittal split ramus osteotomy at Chonnam National University Hospital. Cone-beam CT data were collected at three specific time points: before surgery, immediately after surgery, and approximately 6 months post-surgery. Mandibular movement was measured using InVivoDental 5.4.6. ITK-SNAP 3.8.0 was used to assessed condylar volume changes post-surgery. Condyle positions were evaluated in four parts with RadiAnt DICOM Viewer 4.6.9. Statistical analyses were performed using the SPSS version 23. RESULTS: Considering both Class II and III malocclusion, a 2.91% volume reduction was noted immediately and at 6 months after surgery. Both Class II and III cases demonstrated a decrease in superior joint space by -0.59 mm and medial joint space by -1.09 mm. No significant correlation was found between this process and condylar volume change. CONCLUSIONS: The mandibular condyle volume decreased, and superior-medial movement of the condyle was detected in patients with Class II and III malocclusion immediately and at 6 months after surgery with no volume-position correlation.

Redox-Sensitive Delivery of Doxorubicin from Nanoparticles of Poly(ethylene glycol)-Chitosan Copolymer for Treatment of Drug-Resistant Oral Cancer Cells.

Reactive oxygen species (ROS)-sensitive polymer nanoparticles were synthesized for tumor targeting of an anticancer drug, doxorubicin (DOX). For this purpose, chitosan-methoxy poly(ethylene glycol) (mPEG) (ChitoPEG)-graft copolymer was synthesized and then DOX was conjugated to the backbone of chitosan using a thioketal linker. Subsequently, the chemical structure of the DOX-conjugated ChitoPEG copolymer (ChitoPEGthDOX) was confirmed via 1H nuclear magnetic resonance (NMR) spectra. Nanoparticles of the ChitoPEGthDOX conjugates have spherical shapes and a size of approximately 100 nm. Transmission electron microscopy (TEM) has shown that ChitoPEGthDOX nanoparticles disintegrate in the presence of hydrogen peroxide and the particle size distribution also changes from a monomodal/narrow distribution pattern to a multi-modal/wide distribution pattern. Furthermore, DOX is released faster in the presence of hydrogen peroxide. These results indicated that ChitoPEGthDOX nanoparticles have ROS sensitivity. The anticancer activity of the nanoparticles was evaluated using AT84 oral squamous carcinoma cells. Moreover, DOX-resistant AT84 cells were prepared in vitro. DOX and its nanoparticles showed dose-dependent cytotoxicity in both DOX-sensitive and DOX-resistant AT84 cells in vitro. However, DOX itself showed reduced cytotoxicity against DOX-resistant AT84 cells, while the nanoparticles showed almost similar cytotoxicity to DOX-sensitive and DOX-resistant AT84 cells. This result may be due to the inhibition of intracellular delivery of free DOX, while nanoparticles were efficiently internalized in DOX-resistant cells. The in vivo study of a DOX-resistant AT84 cell-bearing tumor xenograft model showed that nanoparticles have higher antitumor efficacy than those found in free DOX treatment. These results may be related to the efficient accumulation of nanoparticles in the tumor tissue, i.e., the fluorescence intensity in the tumor tissue was stronger than that of any other organs. Our findings suggest that ChitoPEGthDOX nanoparticles may be a promising candidate for ROS-sensitive anticancer delivery against DOX-resistant oral cancer cells.

Accuracy of digital surgical guides for dental implants.

BACKGROUND: Recently developed imaging techniques, such as cone beam computed tomography (CBCT) and CAD/CAM technology, have facilitated reliable implant planning and implant surgical guide production by 3D printing. This study compared the accuracy of implant-guided surgery using the R2GATE® program with CBCT before and after surgery. PATIENTS AND METHODS: The study included patients who visited the Department of Oral and Maxillofacial Surgery at Chonnam National University Hospital from September 2021 to March 2022. Twenty-four implants were placed in eleven patients. Using R2GATE® Windows (Megagen implant, Daegu, Korea) software, implant placement was planned. The difference was measured by the CBCT before and after surgery. The cervical and apical distance and angular deviation of the implants were measured. Statistical analysis was performed using an independent t-test, Pearson correlation, and multiple regression analyses. RESULTS: The three-dimensional linear distance difference between the planned implant and the placed implant was 0.97 ± 0.37 mm at the cervical and 1.13 ± 0.36 mm at the apical. The difference in angle deviation between the planned implant and the placed implant was 3.42 ± 2.12°. Among the variables affecting the accuracy of implant placement, a statistically significant difference was found when using a tissue-supported implant guide, implant diameter and implant length. CONCLUSION: Based on these results, using the R2GATE® program is useful to use an implant digital surgical guide, and it will be used in various clinic.

Open versus closed treatment for extracapsular fracture of the mandibular condyle.

Objectives: Selection of treatment methods for mandibular condylar fractures remains controversial. In this study, we investigated treatment methods for condylar fractures to determine the indications for open or closed reduction. Patients and. Methods: Patients >12 years of age treated for mandibular condylar fractures with a follow-up period of ≥3 months were included in this study. The medical records of enrolled patients were reviewed for sex, age, fracture site, treatment method (open or closed reconstruction), postoperative intermaxillary fixation period, operation time, and complications. Radiological analysis of fracture fragment displacement and changes in ramal height difference was performed using computed tomography and panoramic radiography. Results: A total of 198 patients was investigated, 48.0% (n=95) of whom underwent closed reduction and 52.0% (n=103) underwent open reduction. There was no significant correlation between reduction method and patient sex, age, or follow-up period. No statistically significant difference between the incidence of complications and treatment method was observed. None of the patients underwent open reduction of condylar head fracture. Binary logistic regression analysis showed that open reduction was significantly more frequent in patients with subcondylar fracture compared to in those with a fracture in the condylar head area. There was no statistically significant correlation between the groups and fracture fragment displacement. However, there was a significant difference between the treatment groups in amount of change in ramal height difference between the fractured and the nonfractured sides during treatment. Conclusion: No significant clinical differences were found between the open and closed reduction methods in patients with mandibular condylar fractures. According to fracture site, closed reduction was preferred for condyle head fractures. There was no significant relationship between fracture fragment displacement and treatment method.

Nanophotosensitizers Composed of Phenyl Boronic Acid Pinacol Ester-Conjugated Chitosan Oligosaccharide via Thioketal Linker for Reactive Oxygen Species-Sensitive Delivery of Chlorin e6 against Oral Cancer Cells.

Chlorin E6 (Ce6)-incorporated nanophotosensitizers were fabricated for application in photodynamic therapy (PDT) of oral cancer cells. For this purpose, chitosan oligosaccharide (COS) was conjugated with hydrophobic and reactive oxygen species (ROS)-sensitive moieties, such as phenyl boronic acid pinacol ester (PBAP) via a thioketal linker (COSthPBAP). ThdCOOH was conjugated with PBAP to produce ThdCOOH-PBAP conjugates and then attached to amine groups of COS to produce a COSthPBAP copolymer. Ce6-incorporated nanophotosensitizers using the COSthPBAP copolymer were fabricated through the nanoprecipitation and dialysis methods. The Ce6-incorporated COSthPBAP nanophotosensitizers had a small diameter of less than 200 nm with a mono-modal distribution pattern. However, it became a multimodal and/or irregular distribution pattern when H2O2 was added. In a morphological observation using TEM, the nanophotosensitizers were disintegrated by the addition of H2O2, indicating that the COSthPBAP nanophotosensitizers had ROS sensitivity. In addition, the Ce6 release rate from the COSthPBAP nanophotosensitizers accelerated in the presence of H2O2. The SO generation was also higher in the nanophotosensitizers than in the free Ce6. Furthermore, the COSthPBAP nanophotosensitizers showed a higher intracellular Ce6 uptake ratio and ROS generation in all types of oral cancer cells. They efficiently inhibited the viability of oral cancer cells under light irradiation, but they did not significantly affect the viability of either normal cells or cancer cells in the absence of light irradiation. The COSthPBAP nanophotosensitizers showed a tumor-specific delivery capacity and fluorescence imaging of KB tumors in an in vivo animal tumor imaging study. We suggest that COSthPBAP nanophotosensitizers are promising candidates for the imaging and treatment of oral cancers.

Long-term follow-up implant site development in the submerged mandibular primary second molars: a case report.

Treatment of ankylosed and submerged primary molars without permanent successors is challenging, as normal vertical dentoalveolar growth is compromised. Thus, grafting techniques and distraction osteogenesis are performed for ridge augmentation before implant restoration. However, these techniques are invasive with limited success. Another treatment for implant site development is noninvasive forced eruption. This case report describes long-term follow-up of alveolar ridge augmentation in the submerged mandibular primary second molars using subluxation and orthodontic forced eruption for implant site development. A 19-year old female had Class II molar relationships, upper anterior crowding with large overjet, missing four second premolars and submerged mandibular primary second molars with inadequate vertical development of alveolar bone. For the vertical alveolar bone alterations in the mandible, forced eruption with subluxation of ankylosed lower primary second molars was applied. Treatment outcome was evaluated over 5 years with stable occlusion, healthy periodontal tissues, and successful radiographic results.

Evaluation of mandibular positional changes after orthognathic surgery in skeletal class II and class III surgery-first approach patients.

PURPOSE: The aim of this study was to predict and compare postoperative changes of mandibular position between mandibular setback and advancement surgery in a surgery-first approach (SFA). MATERIALS AND METHODS: The study population included patients who underwent mandibular setback or advancement surgery using bilateral sagittal split ramus osteotomy, those were divided into two groups: mandibular setback and advancement surgery. Surgical and postoperative mandibular positional changes were evaluated by lateral cephalograms and CTs taken within 2 months before surgery (T0), 1 week after surgery (T1), and after the debonding procedure (T2). The postoperative mandibular positional changes were predicted from the increase in vertical dimension (VD) in surgical occlusion and the counterclockwise rotation to the preoperative VD on the lateral cephalograms and CT at T1. Furthermore, resultant measurement on postoperative mandibular positional changes was performed. Finally, we compared the prediction with actual positional changes of the mandible after the debonding procedure. RESULTS: Nine SFA patients with mandibular setback surgery and six with advancement surgery were evaluated and significant mandibular changes from T0 to T1 and from T1 to T2 were observed. Negative correlation between horizontal surgical changes and postoperative horizontal changes was present in both groups. The difference between the predicted and actual amount of postoperative mandibular movement was significant in the mandibular advancement surgery group. CONCLUSION: Postoperative mandibular relapse appeared much larger in the mandibular advancement surgery group than in the setback group. Therefore, it is more important to consider the postoperative mandibular position change in mandibular advancement surgery in SFA.

Reactive Oxygen Species and Folate Receptor-Targeted Nanophotosensitizers Composed of Folic Acid-Conjugated and Poly(ethylene glycol)-Chlorin e6 Tetramer Having Diselenide Linkages for Targeted Photodynamic Treatment of Cancer Cells.

Folic acid-conjugated nanophotosensitizers composed of folic acid (FA), poly(ethylene glycol) (PEG) and chlorin e6 (Ce6) tetramer were synthesized using diselenide linkages for reactive oxygen species (ROS)- and folate receptor-specific delivery of photosensitizers. Ce6 was conjugated with 3-[3-(2-carboxyethoxy)-2,2-bis(2-carboxyethoxymethyl)propoxy]propanoic acid (tetra acid, or TA) to make Ce6 tetramer via selenocystamine linkages (TA-sese-Ce6 conjugates). In the carboxylic acid end group of the TA-sese-Ce6 conjugates, FA-PEG was attached again using selenocystamine linkages to make FA-PEG/TA-sese-Ce6 conjugates (abbreviated as FAPEGtaCe6 conjugates). Nanophotosensitizers were fabricated by a dialysis procedure. In the morphological observations, they showed spherical shapes with small diameters of less than 200 nm. Stability of the aqueous FAPEGtaCe6 nanophotosensitizer solution was maintained (i.e., their particle sizes were not significantly changed until 7 days later). When H2O2 was added to the nanophotosensitizer solution, the particle size distribution was changed from a monomodal pattern to a multimodal pattern. In addition, the fluorescence intensity and Ce6 release rate from the nanophotosensitizers were also increased by the addition of H2O2. These results indicated that the nanophotosensitizers had ROS-sensitive properties. In an in vitro cell culture study, an FAPEGtaCe6 nanophotosensitizer treatment against cancer cells increased the Ce6 uptake ratio, ROS generation and light-irradiated cytotoxicity (phototoxicity) compared with Ce6 alone against various cancer cells. When the folic acid was pretreated to block the folate receptors of the Y79 cells and KB cells (folate receptor-overexpressing cells), the intracellular Ce6 uptake, ROS generation and thereby phototoxicity were decreased, while the MCF-7 cells did not significantly respond to blocking of the folate receptors. These results indicated that they could be delivered by a folate receptor-mediated pathway. Furthermore, an in vivo pulmonary metastasis model using Y79 cells showed folate receptor-specific delivery of FAPEGtaCe6 nanophotosensitizers. When folic acid was pre-administered, the fluorescence intensity of the lungs was significantly decreased, indicating that the FAPEGtaCe6 nanophotosensitizers had folate receptor specificity in vitro and in vivo. We suggest that FAPEGtaCe6 nanophotosensitizers are promising candidates for a targeted photodynamic therapy (PDT) approach against cancer cells.

Effect of rhBMP-2 applied with a 3D-printed titanium implant on new bone formation in rabbit calvarium.

OBJECTIVE: This study sought to compare the biocompatibility of a three-dimensional (3D)-printed titanium implant with a conventional machined titanium product, as well as the effect of such implant applied with recombinant human Bone Morphogenetic Protein Type 2 (rhBMP-2) for guided bone regeneration. METHODOLOGY: Disk-shaped titanium specimens fabricated either by the conventional machining technique or by the 3D-printing technique were compared by MC3T3-E1 cells cytotoxicity assay. New bone formation was evaluated using a rapid prototype titanium cap applied to the calvaria of 10 rabbits, which were divided into two groups: one including an atelopeptide collagen plug on one side of the cap (group I) and the other including a plug with rhBMP-2 on the other side (group II). At six and 12 weeks after euthanasia, rabbits calvaria underwent morphometric analysis through radiological and histological examination. RESULTS: Through the cytotoxicity assay, we identified a significantly higher number of MC3T3-E1 cells in the 3D-printed specimen when compared to the machined specimen after 48 hours of culture. Moreover, morphometric analysis indicated significantly greater bone formation at week 12 on the side where rhBMP-2 was applied when evaluating the upper portion immediately below the cap. CONCLUSION: The results suggest that 3D-printed titanium implant applied with rhBMP-2 enables new bone formation.

Ciprofloxacin-Releasing ROS-Sensitive Nanoparticles Composed of Poly(Ethylene Glycol)/Poly(D,L-lactide-co-glycolide) for Antibacterial Treatment.

Since urinary tract infections (UTIs) are closely associated with oxidative stress, we developed ROS-sensitive nanoparticles for ciprofloxacin (CIP) delivery for inhibition of UTI. Poly(D,L-lactide-co-glycolide) (PLGA)- selenocystamine (PLGA-selenocystamine) conjugates were attached to methoxypoly(ethylene glycol) (PEG) tetraacid (TA) (TA-PEG) conjugates to produce a copolymer (abbreviated as LGseseTAPEG). Selenocystamine linkages were introduced between PLGA and TA to endow reactive oxygen species (ROS) sensitivity to nanoparticles. CIP-incorporated nanoparticles of LGseseTAPEG copolymer were fabricated by W/O/W/W emulsion method. CIP-incorporated nanoparticles responded to H2O2 and then their morphologies were disintegrated by incubation with H2O2. Furthermore, particle size distribution of nanoparticles was changed from mono-modal distribution pattern to multi-modal distribution pattern by addition of H2O2. CIP release from nanoparticles of LGseseTAPEG copolymer was faster in the presence of H2O2 than in the absence of it. In antibacterial study using Escherichia coli (E. coli), free CIP and free CIP plus empty nanoparticles showed dose-dependent inhibitory effect against growth of bacteria while CIP-incorporated nanoparticles have less antibacterial activity compared to free CIP. These results were due to that CIP-incorporated nanoparticles have sustained release properties. When free CIP or CIP-incorporated nanoparticles were introduced into dialysis membrane to mimic in vivo situation, CIP-incorporated nanoparticles showed superior antibacterial activity compared to free CIP. At cell viability assay, nanoparticles of LGseseTAPEG copolymer have no acute cytotoxicity against L929 mouse fibroblast cells and CCD986sk human skin fibroblast cells. We suggest LGseseTAPEG nanoparticles are a promising candidate for CIP delivery.

Effect of Bone Buttressing at the Vertical Osteotomy Site on Postoperative Stability After Mandibular Setback Surgery.

ABSTRACT: This study aimed to assess the effect of bone buttressing at the vertical osteotomy site on postoperative stability after mandibular setback surgery and determine factors contributing to postoperative relapse. This retrospective study was conducted on patients who received mandibular setback surgery using bilateral sagittal split ramus osteotomy. Patients were divided into two groups: group I, intimate bony contact, and group II, bony gap of 2 mm or more. Using lateral cephalograms taken before surgery, 1 week after surgery, and 6 months after surgery, surgical changes, and postoperative relapse were compared between 2 groups. To assess associations between postoperative relapse and other variables, Pearson correlation analysis and multiple linear regression analysis were performed. Twenty-eight patients were evaluated (17 in group I and 11 in group II). Mean relapse was greater in group II (1.8 mm) than in group I (1.2 mm), although there were no significant differences between 2 groups (P = 0.203). Postoperative relapse was significantly associated with intraoperative clockwise rotation of the proximal segment (P < 0.001) and the amount of mandibular setback (P = 0.038). Bony gap was only correlated with postoperative counterclockwise rotation of the proximal segment (P = 0.014). In the regression analysis, intraoperative clockwise rotation of the proximal segment significantly predicted postoperative relapse (P < 0.001, R2 = 0.388). The absence of bone buttressing at the vertical osteotomy site may not significantly affect postoperative stability after mandibular setback surgery, and it is important to minimize intraoperative clockwise rotation of the proximal segment for better postoperative stability.

Application of the Digital Articulator in Surgery-First Approach.

ABSTRACT: Orthognathic surgery with surgery-first concept inevitably leads to an increase in posterior vertical dimension and anterior mandibular movement, causing a relapse. This case report introduces a digital technique for predictable surgical outcome in mandibular setback with the surgery-first orthognathic concept using digital articulator. Intraoral scans and a digital articulator were used to simulate the mandibular position after surgery and to predict postoperative increase in vertical dimension and its expecting forward movement of mandibile. This was incorporated in surgical planning. Sequential cone-beam computed tomography evaluation showed stable condylar position at 3 and 6 months after surgery. Thus, a digital articulator can be used to simulate the surgical outcome and to predict postsurgical increase in vertical dimension for better treatment planning.

Circumscribed Myositis Ossificans of the Masseter Muscle.

ABSTRACT: The authors report a case of myositis ossificans traumatica of the masseter muscles. A 21-year-old man developed masseter myositis after orthognathic surgery to treat facial asymmetry. The myositis may have been triggered by factors such as calcification of a hematoma, periosteum implantation after surgical trauma, and local soft tissue injury. An intraoral incision was made to excise the ectopic bone, resulting in resolution of the patient's symptoms including limited oral opening.

Effect of rhBMP-2 applied with a 3D-printed titanium implant on new bone formation in rabbit calvarium

Abstract Objective This study sought to compare the biocompatibility of a three-dimensional (3D)-printed titanium implant with a conventional machined titanium product, as well as the effect of such implant applied with recombinant human Bone Morphogenetic Protein Type 2 (rhBMP-2) for guided bone regeneration. Methodology Disk-shaped titanium specimens fabricated either by the conventional machining technique or by the 3D-printing technique were compared by MC3T3-E1 cells cytotoxicity assay. New bone formation was evaluated using a rapid prototype titanium cap applied to the calvaria of 10 rabbits, which were divided into two groups: one including an atelopeptide collagen plug on one side of the cap (group I) and the other including a plug with rhBMP-2 on the other side (group II). At six and 12 weeks after euthanasia, rabbits calvaria underwent morphometric analysis through radiological and histological examination. Results Through the cytotoxicity assay, we identified a significantly higher number of MC3T3-E1 cells in the 3D-printed specimen when compared to the machined specimen after 48 hours of culture. Moreover, morphometric analysis indicated significantly greater bone formation at week 12 on the side where rhBMP-2 was applied when evaluating the upper portion immediately below the cap. Conclusion The results suggest that 3D-printed titanium implant applied with rhBMP-2 enables new bone formation.

Postsurgical changes of mandible based on vertical dimension increase in Skeletal Class III deformities.

The aim of this study was to evaluate the postsurgical mandibular changes after surgery based on vertical dimension increase in skeletal Class III deformities. Patients who underwent mandibular setback surgery for skeletal Class III malocclusion correction with surgery-first orthognathic treatment were enrolled in the study. Lateral cephalograms were obtained at initial visit, immediately after surgery, 6 months after surgery, and at post-treatment. Postsurgical change of the mandible based on the vertical dimension increase was estimated using a diagrammatic method before surgery and this amount was compared with the actual amount of mandibular forward movement at 6 months after the surgery, using a paired t-test and Bland-Altman plot. Thirty patients (16 men and 14 women; mean age, 22.6 years) with skeletal Class III deformities had undergone mandibular setback surgery with the surgery-first orthognathic treatment. Immediately after surgery, the mandible setback was 9.4 ± 3.7 mm at pogonion. Six months after surgery, the mandible moved forward at an average of 2.3 ± 1.5 mm which corresponded to the estimated value of 2.2 ± 0.9 mm. The estimated amount of postsurgical movement did not show a statistically significant difference from the actual value on paired t-test (p = 0.349). The Bland-Altman analysis showed that the difference between the two values was within the limits of agreement. The postsurgical changes based on vertical dimension increase in surgery-first orthognathic treatment might be predicted by using a diagrammatic method.

Combinatorial Effect of Cold Atmosphere Plasma (CAP) and the Anticancer Drug Cisplatin on Oral Squamous Cell Cancer Therapy.

Cold atmospheric plasma (CAP) has been extensively investigated in the local treatment of cancer due to its potential of reactive oxygen species (ROS) generation in biological systems. In this study, we examined the synergistic effect of combination of CAP and cisplatin-mediated chemotherapy of oral squamous cell carcinoma (OSCC) in vitro. SCC-15 OSCC cells and human gingival fibroblasts (HGF-1) cells were treated with cisplatin, and then, the cells were irradiated with CAP. Following this, viability and apoptosis behavior of the cells were investigated. The viability of SCC-15 cells was inhibited by cisplatin with a dose-dependent manner and CAP treatment time. HGF-1 cells also showed decreased viability by treatment with cisplatin and CAP. Combination of 1 µM cisplatin plus 3 min of CAP treatment or 3 µM cisplatin plus 1 min of CAP treatment showed a synergistic anticancer effect with appropriate cytotoxicity against normal cells. ROS generation and dead cell staining were also increased by the increase in CAP treatment time. Furthermore, tumor-suppressor proteins and apoptosis-related enzymes also increased according to the treatment time of CAP. We showed the synergistic effect of cisplatin and CAP treatment against SCC-15 cells with low cytotoxicity against normal cells.

Changes in the temporomandibular joint clicking and pain disorders after orthognathic surgery: Comparison of orthodontics-first approach and surgery-first approach.

The purposes of this study were to investigate the influence of the orthodontics-first approach (OFA) and surgery-first approach (SFA) on changes in the signs and symptoms of temporomandibular joint disorders (TMDs) and to compare pre- and postoperative orthodontic treatment duration and total treatment duration between the two approaches. This retrospective study recruited 182 adult patients with malocclusions treated with OFA and SFA and recorded variables such as age, gender, skeletal classification, and signs and symptoms of TMD (clicking and pain disorders) before the start of the surgical-orthodontic treatment and after surgery. Changes in the signs and symptoms of TMD and treatment duration were evaluated within each approach and compared between two approaches. A binary logistic regression was performed to assess the influence of the variables on the postoperative signs and symptoms of TMD. There were no significant postoperative changes in temporomandibular joint (TMJ) pain for OFA and SFA, whereas a significant reduction was found in TMJ clicking after surgery for both approaches. According to binary logistic regression, the type of surgical-orthodontic treatment (OFA or SFA) was not a significant risk factor for postoperative TMJ clicking and pain, and the risk of postoperative TMJ clicking and pain was significant only when TMJ clicking (OR = 10.774, p < 0.001) and pain (OR = 26.876, p = 0.008) existed before the start of the entire treatment, respectively. With regard to the treatment duration, SFA (21.1 ± 10.3 months) exhibited significantly shorter total treatment duration than OFA (34.4 ± 11.9 months) (p < 0.001). The results of this study suggest that surgical-orthodontic treatment using SFA can be a feasible option of treatment for dentofacial deformities based on the equivalent effect on TMD and shorter overall treatment period compared to conventional surgical-orthodontic treatment using OFA.

Comparison of postoperative condylar changes after unilateral sagittal split ramus osteotomy and bilateral sagittal split ramus osteotomy using 3-dimensional analysis.

OBJECTIVE: This study aimed to evaluate postoperative changes in the condyle after unilateral sagittal split ramus osteotomy (USSRO) and to compare them with changes occurring after bilateral sagittal split ramus osteotomy (BSSRO). STUDY DESIGN: For 50 condyles from 25 patients, positional and volumetric changes of condyle were analyzed by using computed tomography images taken before, immediately after, and 6 months after surgery and compared between the USRRO and BSSRO groups. RESULTS: The condyle showed lateral and inferior displacement immediately after surgery and medial and superior movement at 6 months after surgery in the USSRO and BSSRO groups. No statistically significant difference was found between the 2 groups in the time-course positional change and rotation of the condyle. In the comparison of bodily shift and rotation between operated and nonoperated sides in USSRO group, there were no significant differences between the 2 sides, except for the perioperative rotation pattern on the coronal plane. At 6 months after surgery, the changed volume relative to preoperative condylar volume was only 5.2% in the USSRO group and 2.7% in the BSSRO group. CONCLUSIONS: The findings from this study suggest that USSRO can be used effectively in appropriately selected patients; however, temporomandibular joint (TMJ) problems may arise when condylar displacement is excessive enough to exceed physiologic tolerances.

Evaluation of Bone Remodeling After Simultaneous Sagittal Split Ramus Osteotomy and Mandibular Angle Ostectomy in Patients With Mandibular Prognathism.

PURPOSE: The present study assessed the postoperative bone remodeling after simultaneous sagittal split ramus osteotomy (SSRO) and mandibular angle ostectomy using a 3-dimensional analysis of computed tomography (CT) data. MATERIALS AND METHODS: We designed and implemented a retrospective study that included patients who had undergone SSRO with (study group) or without (control group) mandibular angle ostectomy. Using CT data taken immediately after (T1) and 6 months (T2) after surgery, the vertical and horizontal morphologic changes of the mandibular angle were evaluated and compared between the 2 groups. In the study group, the volumetric changes of the mandibular angle were assessed, and the bone regeneration rate was calculated. RESULTS: A total of 58 mandibular angles were evaluated (32 in the study group and 26 in the control group). The study group exhibited significantly greater vertical bone regrowth at the middle and posterior regions of the mandibular angle ostectomy line compared with that in the control group (middle, P < .001; posterior, P < .001). Both groups showed significant horizontal bone regrowth at 6 months postoperatively (P < .01). In the study group, the postoperative vertical bone regrowth was significantly associated with the extent of exposed bone below the angle ostectomy line at T1 for all regions (P < .001). The percentage of postoperative regenerated bone volume relative to the volume of bone removed intraoperatively was 41.8%. CONCLUSIONS: The present findings suggest that significant bone regrowth could occur after mandibular angle ostectomy with simultaneous SSRO. Therefore, it is necessary to consider bone remodeling patterns in the treatment planning stage for better and more predictable surgical outcomes.